Update your Samsung Galaxy S4 (I9505) to Leaked Android 4.3 ROM

S4-Android-4.3-SM-EDIT
Model: GT-I9505
Country: Open Asia
Version: Android 4.3
Changelist: 1840064
Build date: Tue, 8 Oct 2013 23:29:05 +0000
Product Code: OLB
PDA: I9505XXUEMJ3
CSC: I9505OLBEMJ2
MODEM: I9505XXUEMJ3
Download: I9505XXUEMJ3_I9505OLBEMJ2_OLB.zip
NOTE
- This firmware will WIPE your device (Perform a backup before flashing)
- This test firmware will NOT increase your binary counter NOR void your warranty.
- This test firmware will NOT trigger your KNOX Warranty Counter (If it’s 0×0 before flashing, it will remain 0×0 after flashing and vice versa).
- This test firmware is a pre-release firmware and not official from Samsung.
- We have fully tested this firmware and this firmware works perfectly as any other official firmware.
INSTRUCTIONS
- Extract (unzip) the firmware file
- Download Odin3 v3.09 (From here or here)
- Extract Odin .ZIP file
- Open Odin3 v3.09
- Restart phone in download mode (Press and hold Home + Power + Volume down buttons)
- Connect phone and wait until you get a blue sign in Odin
- Add AP_I9505XXUEMJ3_1840064_REV06_user_low_ship_MULTI_CERT.tar.md5 to AP
- Add BL_I9505XXUEMJ3_1840064_REV06_user_low_ship_MULTI_CERT.tar.md5 to BL
- Add CP_I9505XXUEMJ3_1840064_REV06_user_low_ship_MULTI_CERT.tar.md5 to CP
- Add CSC_OLB_I9505OLBEMJ2_1765174_REV06_user_low_ship_MULTI_CERT.tar.md5 to CSC
- Make sure re-partition is NOT ticked
- Click start button, sit back and wait a few minutes.
- If you encounter any issues with the firmware (Any FC, Bootloop etc)
- Boot into recovery mode (Home+power+vol up)
- Choose to wipe/factory reset. (THIS WILL ERASE ALL OF YOUR DATA INCLUDING YOUR INTERNAL SD CARD!)
- Then choose reboot and you should be good to go!
VIDEO
SCREENSHOTS